This listing was posted on PrismHR Hiring.
Flowback Operator 3 - Midland
Location:
Midland, TX
Description:
POSITION SUMMARY: A Flowback Operator (Operator 3) is primarily responsible for location setup, drill-out, frac watch/support, well testing procedures and reporting procedures. Furthermore, the individual will ensure quality control and safe operations during all aspects of the operations. ESSENTIAL DUTIES AND RESPONSIBILITIES: Abides by all Prime Well Solutions, LLC Safety and Operational Policies and Procedures. Must understand and comply with all safety rules and company policies. Must abide by all Customer Safety policies and procedures while on customer’s job site. Installs, repairs, removes and maintains various company tools and equipment, and exhibits proficiency within a six-month period. Monitor well fluids and gases and report accurately. Operate Flowback equipment such as Choke Manifolds, Sand Separators, Test Separators, Production Facilities, Flow Back tanks, etc. Monitor the production capability of a well. Anticipate changes in production capability over time, Determine the reservoir drive mechanism, capture of drilled out plug parts, clean-up of frac fluids and sand, collect fluid, solids, and gas samples of the well to monitor changes in production and assess the well capability. Regularly inspects company equipment for preventative maintenance purposes. Assures proper operation, maintenance, applications and document repairs and/or damages of company equipment in a timely manner. Completes all paperwork on a daily basis in a timely manner as required by company and supervisor, including preparation and timely submission of accurate and thorough completion of all paperwork including, but not limited to, timesheets, iScout, DVIR, JSA, Safety Observations, etc. With the assistance of other operators and employees, unloads and assembles the equipment to be used, sets up the service units, and assists the rig up/down as needed. Performs maintenance and reports on all company vehicles, and/or company owned and rental equipment. May oversee job site services and provide direction to onsite labor when needed. Assists in pre-job safety meetings to include review of job safety analysis (JSA) process. Maintains open lines of communication with District Manager and various customers before, during and after job completion. Ensures management is appropriately informed of area activities and attends meetings as required. Drives on Company business on a daily basis in a safe manner, observing all company and government regulations, between each district and off-site locations at scheduled time. Performs other duties as assigned. SPECIALIZED DUTIES OPERATOR 3: Operator 3 (24 months minimum or cumulative 3+ years’ previous experience): Operate the equipment used in the multiple services provided in Well Testing to include safety systems, pumps, valves, rigging mechanisms, pressure testing equipment, 1502 iron, plug valves, plug valve manifolds, plug catchers/part catchers, sand traps, test separators, flare stacks, generators, pumps/filter pods, compressors, and third-party tanks without direct supervision. Proficient in performing testing as required by customer including but not limited to collecting gas samples, API, Chlorides, Salinity, BS&W, Grind Out, etc. Direct communication with managers, Service Company, third party monitors and Company personnel on job progress, operations, etc. Learn to document any and all necessary repairs/maintenance on equipment and communicate with Yard Manager. Proficient on the SOP processes and work instructions for the multiple services provided by our company. Training and mentoring Level I & II Flowback Operators. Technical Expertise of the operation procedures, processes and materials used by the various service companies on location. Must be able to figure/calculate bottoms up and oil/gas ratios, choke coefficients, fluid/gas rates. Must be able to rig-up, operate, and troubleshoot multi-well ESD systems, and assist with coordination of all equipment and crew during rig-up and rig-down. Knowledgeable of testing practices that give most accurate data from testing equipment, including but not limited to, critical flow, differential setting, back pressure, etc. Learn to coordinate all procedures, shut down systems, choke manifolds, separation activities and calculations as projects require to ensure all well data is as accurate as possible. Learn all phases of the well testing services being provided on customer locations, including well testing equipment, operations, and services including rig-up, completions, production and rig-down. Must have extensive knowledge of testing practices that give most accurate data from testing equipment, including but not limited to, critical flow, differential settings, back pressure, etc. Must be able to provide technical expertise and assist the actual completion of the well, which may consist of checking plug catchers, replacing washed out equipment, taking return rates for the Operating Company, working with the coil tubing unit, and work-over rigs in the completion of the well. Must be able to coordinate all procedures, shut down systems, choke manifolds, separation activities and calculations as projects require to ensure all well data is as accurate as possible. Maintains and oversees all phases of the well testing services being provided on customer locations. Requires high level knowledge of well testing and production equipment, operations, and services including rig-up, completions, production and rig-down. KNOWLEDGE, SKILLS AND ABILITIES: Must have excellent verbal and written communication skills in English. Must be proficient with a computer/laptop. Ability to work and drive in all weather conditions. Ability to travel to other facilities, if required. Ability to think quickly in emergency type of situations on job site locations. Ability to operate hand tools. Basic math and algebra skills. Must have mechanical abilities. Working knowledge of Microsoft Office software. Familiar with a variety of the field's concepts, practices, and procedures. Ability to read and interpret documents, such as safety rules, operating, and maintenance instructions, and procedure manuals. Ability to deal with problems involving several concrete variables in standardized situations. Familiar with tools and equipment utilized by company, preferred. QUALIFICATION REQUIREMENTS: High School Diploma or General Education Degree (GED). Must be able to travel for extensive amount of days and be on call 24/7. Must maintain a safe driving record as prescribed by company policy. Must successfully pass pre- and post-employment drug and alcohol tests per company policy. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to frequently lift and move materials up to 75 pounds or less unassisted. Anything 76 lbs. or more requires mechanical assistance or a team lift. Requires pushing and pulling up to 140 pounds of force, bending, standing, kneeling, carrying, sitting, climbing for extended periods of time each day. Must be able to swing 8-10 pound hammer repetitively. Requires appropriate PPE to be worn; safety glasses, steel toe boots, ear plugs etc.… Requires exposure to moderate noise levels. Exposure to warm, hot and cold temperatures. May be required to be clean shaven. COMPETENCIES To perform the job successfully, an individual should demonstrate the following: Problem Solving: Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Customer Service: Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments. Oral Communication: Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. Written Communication: Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information. Teamwork: Balances team and individual responsibilities; Exhibits objectivity and openness to others’ views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interest; Able to build moral and group commitments to goals and objectives; Supports everyone’s efforts to succeed. Planning/Organizing: Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Develops realistic action plans. Professionalism: Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. Cost Consciousness: Works within approved budget; Develops and implements cost saving measures; Contributes to profits and revenue; Conserves organizational resources. Ethics: Treats people with respect; Keeps commitments; inspires the trust of others; Works with integrity and ethically; Upholds organizational values. Organizational Support: Follows policies and procedures; Completes administrative tasks correctly and on time; supports organization’s goals and values; Benefits organization through outside activities; Supports affirmative action and respects diversity. Judgment: Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process. Quality: Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Safety & Security: Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Attendance/Punctuality: Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time
Company:
Prime Well Solutions
Posted:
May 15 on PrismHR Hiring
Visit Our Partner Website
This listing was posted on another website. Click here to open: Go to PrismHR Hiring
Important Safety Tips
- Always meet the employer in person.
- Avoid sharing sensitive personal and financial information.
- Avoid employment offers that require a deposit or investment.
To learn more, visit the Safety Center or click here to report this listing.
More About this Listing: Flowback Operator 3 - Midland
Flowback Operator 3 - Midland is a Construction Operator Job at Prime Well Solutions located in Midland TX. Find other listings like Flowback Operator 3 - Midland by searching Oodle for Construction Operator Jobs.
Flowback Operator 3 - Midland is a Construction Operator Job at Prime Well Solutions located in Midland TX. Find other listings like Flowback Operator 3 - Midland by searching Oodle for Construction Operator Jobs.